► xr 9.9 29er carbon
► GENERAL INFO
xr 9.9 29er carbon · 30 speeds
xr 9.9 29er Carbon
Rock Shox SID XX, Axis: 15mm, remote lockout
Shimano XTR RD-M9000
Shimano XTR SL-M9000-I
Shimano XTR SM-RT99, 160mm.
Shimano XTR CS-M9000, 11-40T
Shimano XTR FC-M9000, 175mm, 30T
Kenda Happy Medium, 29x2.10
Easton EC-90 HB
Shimano XTR PD-M9000
S, M, L
Carbon / cyan with lime detail
xr 9.9 29er carbon
Our 29er bikes have a lower gravity center point than that of the 26” model, as measured to the pivot point, which provides more stability when pedaling.
The combination of the 29er carbon frame and diameter of wheels allows for increased speed in straight ways and even enables to maintain speed in turns both in rugged and difficult terrains such as soft grounds.
An increased traction surface and drive is also possible because of a larger wheel in diameter, which results in less tension to the suspension as impacts are absorbed much easily.
The 29er frame is brand new in terms of construction and aerodynamics. After years of testing, our engineers have designed a very light yet extremely resistant frame, which fills the needs of high competition riders.
Made entirely out of carbon, both the seat tube and the frame bottom bracket Press Fit30 are also 100% carbon. The absence of aluminum inserts provides an easy, controlled and fast ride.
Carbon fiber is a synthetic fiber composed by very fine filaments, with properties very similar to steel and greater resistance to impact
Moreover, we use VUD (Vairo Unidirectional) Carbon fiber. A key factor in VUD is that, unlike regular more common weaves which are 50% horizontal and 50% vertical, most fibers are aligned in the same direction. This results in a remarkably enhanced resistance in targeted areas.
In Vairo we understand technology as applied science. Based on the unique VUD Carbon Composite as designed by our very own Product Engineers, we have achieved an almost perfect frame structure in as much as fiber optimization allows for great resistance to fatigue and torsion.
TAPERED HEAD TUBE
The head set is 1 1/8" in the top part and 1.5" in the bottom part with a built-in head set- results in a perfect fit with forks of steerer conic (28.6mm / 39.8 mm). The end result is enhanced rigidity, security and control when riding the bike.
INTERNAL CABLE ROUTING
Internally routed cables provide for a very clean and neat aesthetics while at the same time preventing unnecessary friction. Materials remain clean and since no outer casing is needed, which in turn contributes to keeping total weight low.
DIRECT POST MOUNT
The new 29er frames have an assemblage system Post Mount: brakes are placed inside the stays of the rear triangle which provides the following two advantages:
- Allows for a perfect line-up of the caliper, ruling out possible friction and noise.
- Because of its location: perpendicular to the wheel axis, brake pulls strength in a more homogeneus way which results in minimum energy loss while braking. In other words: more braking power.
The four point technology in rear triangle warrants that each frame in each individual size will share the exact same properties in terms of wheel travel, axis and path.
The benefits are more than evident when testing how efficiently the bike performs in terms of rigidity and transmission power.
BB SHELL PRESS FIT30
The bottom bracket is made 100% out of carbon and is wider than regular, Its design and size ensure swift and always accurate installation and then minimum maintenance requisites and no annoying sounds when pedaling. Additionally, it allows for an increase in rigidity and the torsion distribution on the axis zone.
L=TOP TUBE LENGTH
D=HEAD TUBE LENGTH
AV=FRONT TRIANGLE LENGTH
LT=DISTANCE BETWEEN AXIS
ALFA=SEAT TUBE ANGLE
BETA=HEAD TUBE ANGLE
Angles of our 29er frame are designed to provide a perfect balance between speed and stability.
The angle of the front tube and that of the seat tube were modified to achieve ideal lateral balance, optimum pedaling and an acute precision in riding all types of terrain.
Stays length has been somewhat shortened to provide more control while riding all surface types.
Finally, by shortening the distance from the seat tube to the ground, our biker can ride more comfortably under regular circumstances and also more easily use his foot for balance in trickier grounds.
Go To Spanish Version
VAIRO - 2016 - ALL RIGHTS RESERVED. All images, photos and paintings are referential mode. The products displayed on this website may be changed in design, color, structure, etc., without prior notice by the company.